- Complete 2AD frame, length and winding code
- Natural or forced-air cooling arrangement
- Motor feedback or encoder configuration
- Mounting flange and shaft interface
- Connector direction and special-design suffixes
2AD family · 2AD280 series
Indramat 2AD280 main-spindle motors
2AD280 is documented in A, B and C lengths with B03 foot mounting, axial-blower cooling, length-specific winding codes and digital feedback choices.
Product identification2AD280
Request photos of the exact unit with your quote.
Need a complete 2AD280 configuration?
Call to check stock with the full nameplate code. We have not matched a complete Finale description to this model yet.
Models
2AD280 models and configurations
Series overview
What 2AD280 identifies
The preserved 2AD280 chart describes a foot-mounted main-spindle motor with left or right power-connection position, axial-blower cooling and no holding brake. Motor length, winding, feedback and shaft fields remain configuration-specific.
Ratings, connections, feedback, braking and mechanical options vary by complete type code. Send Litco Automation a clear nameplate photo so the exact configuration and compatible replacement can be confirmed.
Technical specifications
Documented 2AD280 order-code fields
These values come from the preserved type-code reference. They describe documented ordering fields, not a promise that every theoretical combination was produced or is currently in stock.
- Motor lengths
- A · B · C
- Mounting
- B03 foot mounting
- Power connection
- L left or R right · junction box output code L
- Cooling
- 1 axial blower, blowing
- Windings
- 2AD280A = AS · 2AD280B = AS · 2AD280C = AD
- Holding brake
- 0 without holding brake
- Motor feedback
- 6 digital servo · 7 digital servo with integrated multiturn absolute encoder
- Shaft / bearing / vibration
- Plain or keyed shaft, sealed or unsealed · N standard or V heavy-duty bearing · R vibration grade
Configuration checklist
Identification guide
Match the whole 2AD280 configuration
- Machine-tool main spindles
- Printing and converting machinery
- Production-machine drives
- Asynchronous servo and spindle applications
Series questions
2AD280 questions
Before Litco pulls a unit
Is 2AD280 enough information to order a replacement?+
No. 2AD280 identifies the series group, but the complete type code still carries the winding, cooling, feedback, mounting, shaft, brake and mechanical options that determine compatibility.
Which 2AD280 fields should I compare first?+
Start with complete 2ad frame, length and winding code; natural or forced-air cooling arrangement; motor feedback or encoder configuration. Then preserve the remaining suffix, material number, revision and every installed option or firmware label.
Where is 2AD280 equipment commonly used?+
2AD280 is documented for machine-tool main spindles, printing and converting machinery, production-machine drives, asynchronous servo and spindle applications. The installed machine, axis and connected equipment still control the final replacement decision.
Can Litco evaluate a failed 2AD280 unit?+
Yes. Litco can discuss replacement, repair and exchange paths after reviewing the complete code, application and failure information.
Get a replacement or repair quote.
Your part number carries into the form. Tell us what you need and how soon you need it.