- Complete 2AD frame, length and winding code
- Natural or forced-air cooling arrangement
- Motor feedback or encoder configuration
- Mounting flange and shaft interface
- Connector direction and special-design suffixes
2AD family · 2AD180 series
Indramat 2AD180 asynchronous spindle motors
2AD180 is documented in C and D lengths with B35 mounting, axial or radial blowers, BS winding codes and configurable feedback, shaft and bearing fields.
Product identification2AD180
Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.
Models
2AD180 models and configurations
Series overview
What 2AD180 identifies
The preserved 2AD180 chart documents top, left or right power-connection positions; axial and four radial-blower positions; high-resolution or digital feedback; several shaft styles; and standard or heavy-duty bearings. Brake and side-B shaft options carry explicit compatibility notes.
Ratings, connections, feedback, braking and mechanical options vary by complete type code. Send Litco Automation a clear nameplate photo so the exact configuration and compatible replacement can be confirmed.
Technical specifications
Documented 2AD180 order-code fields
These values come from the preserved type-code reference. They describe documented ordering fields, not a promise that every theoretical combination was produced or is currently in stock.
- Motor lengths / winding
- C or D length · BS winding for both
- Mounting
- B35 flange and foot mounting
- Cooling
- 1 or 2 axial blower · 3 top, 6 right, 7 bottom or 8 left radial blower
- Holding brake
- 0 none · 1 electrically clamped · 3 electrically released heavy-duty; brake choices are documented only for C length
- Motor feedback
- 3 high-resolution · 6 digital servo · 7 digital servo with integral multiturn absolute encoder
- Side-B shaft end
- 2 without · 3 for mounted encoder, only with radial blower and feedback 3
- Shaft / bearing
- Plain or keyed shaft, sealed or unsealed · N standard or V heavy-duty bearings
- Vibration
- R, S or S1 · S1 is unavailable with heavy-duty bearings
Configuration checklist
Identification guide
Match the whole 2AD180 configuration
- Machine-tool main spindles
- Printing and converting machinery
- Production-machine drives
- Asynchronous servo and spindle applications
Series questions
2AD180 questions
Before Litco pulls a unit
Is 2AD180 enough information to order a replacement?+
No. 2AD180 identifies the series group, but the complete type code still carries the winding, cooling, feedback, mounting, shaft, brake and mechanical options that determine compatibility.
Which 2AD180 fields should I compare first?+
Start with complete 2ad frame, length and winding code; natural or forced-air cooling arrangement; motor feedback or encoder configuration. Then preserve the remaining suffix, material number, revision and every installed option or firmware label.
Where is 2AD180 equipment commonly used?+
2AD180 is documented for machine-tool main spindles, printing and converting machinery, production-machine drives, asynchronous servo and spindle applications. The installed machine, axis and connected equipment still control the final replacement decision.
Can Litco evaluate a failed 2AD180 unit?+
Yes. Litco can discuss replacement, repair and exchange paths after reviewing the complete code, application and failure information.
Get a replacement or repair quote.
Call to check stock, condition and lead time. Your part number carries into the form.