BrandIndramatBosch Rexroth · Indramat

MDD071 Series · A-length model

MDD071A Indramat Digital AC servo motor

MDD071A is the A-length package within the MDD071 digital ac servo motor range. The model prefix fixes the 071 frame and A motor length, but the winding, cooling, feedback, centering, shaft, connector and brake fields still determine the complete replacement.

The planning manual’s MDD071A-N-030 row documents 2.2 Nm continuous torque at standstill and 3.7 A continuous current at a nominal 3,000 rpm winding. Those values describe that published operating row—not every complete MDD071A part number.

Call to check stockSend the complete type code so Litco can check the exact shelf configuration and condition

Call 210-680-9570 Quick Quote

Product identificationMDD071A

Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.

Known exact part-number variations

MDD071A exact part numbers

Call to check stock

MDD071A-N-030-N2S-095PB0

Confirm the complete code for replacement, repair or exchange.

View Exact Page

Call to check stock

MDD071A-N-040-N2T-095PA0

Confirm the complete code for replacement, repair or exchange.

View Exact Page

Call to check stock

MDD071A-N-060-N2T-095PB0

Confirm the complete code for replacement, repair or exchange.

View Exact Page

MDD071A overview

MDD071A is the A-length MDD071 servo motor. Baseline dimension A is 208 mm. The complete suffix determines winding, cooling, feedback, shaft and brake choices.

Model-specific technical data

MDD071A-N-030 manual snapshot

Source: MDD project planning manual, Fig. 7.1, page 64. Nominal winding speed is not a universal maximum usable speed. Match the drive, load, cooling arrangement and complete suffix.

Continuous ratings use the manual’s 60 K housing-temperature-rise basis. Published motor mass excludes the holding brake and external cooling hardware.

Model: MDD071A
Motor platform: Digital AC servo motor
Motor length: A designation
Baseline dimension A: 208 mm
Reference winding row: MDD071A-N-030
Reference nominal speed: 3,000 rpm
Continuous torque at standstill: 2.2 Nm natural convection
Continuous current at standstill: 3.7 A natural convection
Theoretical maximum torque: 6.9 Nm · drive dependent
Maximum current: 16.5 A
Rotor inertia: 4.4 × 10⁻⁴ kg·m²
Thermal time constant: 45 min natural
Published motor mass: 6.5 kg
Published nominal speeds: 3,000 rpm · 4,000 rpm · 6,000 rpm
Centering diameter: 95 mm
Output shaft diameter: 19 mm (k6)
Shaft styles: Plain shaft · Keyed shaft

Dimensions, winding and cooling

Mechanical interface and speed

Shaft, flange, centering and winding choices

Shaft & flange

19 mm (k6) output shaft

Plain shaft and Keyed shaft are documented at series level. Match the flange drawing, shaft seal and hub connection before installation.

Centering diameter

95 mm

The centering choice is encoded in the complete part number and must match the machine flange or adapter.

Available speeds

3,000 rpm · 4,000 rpm · 6,000 rpm

These are published nominal-speed choices for this model. The winding code and selected drive determine the actual configuration.

Feedback, shaft and brake choices

Configuration choices

Cooling, feedback and holding brake

Cooling

Manage continuous load and machine clearance

Natural convection

This model is documented for natural convection; confirm that the installed machine provides the required airflow and ambient conditions.

Feedback

Keep the drive’s position and speed signal compatible

Digital servo feedback
Digital servo feedback with integrated multiturn absolute encoder

Photograph the feedback connector and every suffix after the core model.

Holding brake

Match the installed holding requirement

Without holding brake
3.0 Nm holding brake
6.5 Nm holding brake

A blocking or holding brake is not a dynamic service brake. Check the published exclusion notes for the exact motor length.

Full type-code guide

Full part-number decoder

Read the tag from left to right

The decoder identifies what each field controls; it does not generate valid combinations. Use the factory type code and option exclusions as one record.

MDD

Motor for digital drive controllers

071

Motor frame / size

A

Motor-length and torque package

Housing design

Natural-convection or supported surface-cooling housing

Nominal-speed code

3,000 rpm or 4,000 rpm or 6,000 rpm

Balance / side-B fields

Balance class and standard design without a side-B shaft extension

Feedback field

Digital servo feedback or Digital servo feedback with integrated multiturn absolute encoder

Centering field

95 mm

Shaft / connector / brake

Mechanical interface, connection direction and holding option

Get a replacement or repair quote.

Call to check stock, condition and lead time. Your part number carries into the form.

Quick Quote Call 210-680-9570 Add photos or repair details →

Keep browsing

Other MDD071 motor lengths

A-length · 208 mmMDD071A2.2 Nm reference torque · 6.5 kg B-length · 248 mmMDD071B4.4 Nm reference torque · 8.8 kg C-length · 288 mmMDD071C6.6 Nm reference torque · 11 kg

← Return to all MDD series and models

Model-level planning-manual referenceFig. 7.1 · page 64

MDD 071 technical and dimensional data, manual pages 64–72. Published choices do not prove present inventory or that every option can be combined. Confirm the complete type code before replacement.

Open Original Manual ↗