Shaft & flange
32 mm output shaftPlain shaft and Keyed shaft are documented at series level. Match the flange drawing, shaft seal and hub connection before installation.
MAC115 Series · A-length model
MAC115A Indramat AC servo motor
MAC115A is the A-length package within the MAC115 legacy analog ac servo motor range. The model prefix fixes the 115 frame and A motor length, but the winding, cooling, feedback, centering, shaft, connector and brake fields still determine the complete replacement.
Call to check stockSend the complete type code so Litco can check the exact shelf configuration and condition
Product identificationMAC115A
Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.
Known exact part-number variations
MAC115A exact part numbers
Call to check stock for an exact part.
Send the complete type code and a clear nameplate photo. Litco can check the exact configuration, current availability and repair options.
MAC115A overview
MAC115A is the A-length MAC115 servo motor. Baseline dimension A is 357 mm. The complete suffix determines winding, cooling, feedback, shaft and brake choices.
Model-specific technical data
HS winding code manual snapshot
Source: MAC project planning manual, Fig. 8.1, page 137. Nominal winding speed is not a universal maximum usable speed. Match the drive, load, cooling arrangement and complete suffix.
Continuous ratings use the manual’s 60 K housing-temperature-rise basis. Published motor mass excludes the holding brake and external cooling hardware.
- Model
- MAC115A
- Motor platform
- Legacy analog AC servo motor
- Motor length
- A designation
- Baseline dimension A
- 357 mm
- Reference winding row
- HS winding code
- Reference nominal speed
- 2,000 rpm
- Continuous torque at standstill
- 28 Nm natural convection / 42 Nm surface cooled
- Continuous current at standstill
- 32.5 A natural convection / 48.8 A surface cooled
- Maximum peak pulse current
- 163 A
- Rotor inertia
- 123 × 10−4 kg·m²
- Thermal time constant
- 90 min natural · 60 min surface cooled
- Published motor mass
- 33 kg
- Published nominal speeds
- 2,000 rpm · 3,000 rpm
- Centering diameter
- 130 mm standard · 180 mm special
- Output shaft diameter
- 32 mm
- Shaft styles
- Plain shaft · Keyed shaft
Dimensions, winding and cooling
Mechanical interface and speed
Shaft, flange, centering and winding choices
Centering diameter
130 mm standard · 180 mm specialThe centering choice is encoded in the complete part number and must match the machine flange or adapter.
Available speeds
2,000 rpm · 3,000 rpmThese are published nominal-speed choices for this model. The winding code and selected drive determine the actual configuration.
Feedback, shaft and brake choices
Full type-code guide
Full part-number decoder
Read the tag from left to right
The decoder identifies what each field controls; it does not generate valid combinations. Use the factory type code and option exclusions as one record.
MAC
Motor family for analog drives
115
Motor frame / size
A
Motor-length and torque package
Cooling field
Natural convection or an axial/radial blower arrangement
Winding field
Nominal-speed and winding configuration
Feedback field
Tachometer feedback plus any shaft or mounted encoder option
Centering field
130 mm standard or 180 mm special
Shaft / connector / brake
Physical interface and holding option
Special suffix
Factory special design, when present
Get a replacement or repair quote.
Call to check stock, condition and lead time. Your part number carries into the form.
Keep browsing
Other MAC115 motor lengths
Model-level planning-manual referenceFig. 8.1 · page 137
Open Original Manual ↗MAC 115 section; available options on manual page 153. Published choices do not prove present inventory or that every option can be combined. Confirm the complete type code before replacement.