- Complete KSM01.2B designation and motor size
- Size-specific winding code
- S1 single-turn or M1 multi-turn absolute encoder
- Plain or keyed shaft and 24 V holding-brake option
- Hybrid connection, SERCOS 2, 750 V class and firmware item
KSM family · KSM041 series
Bosch Rexroth KSM041 distributed servo drives
KSM041 is the 041-size IndraDrive Mi distributed servo drive documented with C length, winding code 42 and configuration-specific encoder, shaft and brake fields.
Product identificationKSM041
Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.
Models
Known KSM041 catalog pages
Don’t see your configuration?
Send the complete nameplate code so Litco can check availability, condition and compatibility.
Call 210-680-9570Series overview
What KSM041 identifies
The preserved KSM type-code reference identifies KSM041 within line 01, design 2 and Basic performance. KSM041 uses motor length C and lists winding code 42; the remaining fields distinguish natural-convection cooling, encoder, hybrid connection, shaft, holding brake, SERCOS 2, the D7 DC 750 V connecting-voltage code and firmware.
Ratings, connections, feedback, braking and mechanical options vary by complete type code. Send Litco Automation a clear nameplate photo so the exact configuration and compatible replacement can be confirmed.
Technical specifications
Documented KSM041 order-code fields
These values come from the preserved type-code reference. They describe documented ordering fields, not a promise that every theoretical combination was produced or is currently in stock.
- Base designation
- KSM01.2B-041C
- Documented winding
- 42
- Cooling
- N · natural convection
- Encoder
- S1 optical single-turn Hiperface, 128 increments · M1 optical multi-turn absolute Hiperface, 128 increments
- Shaft
- G plain shaft with shaft sealing ring · P keyed shaft per DIN 6885-1 with shaft sealing ring
- Holding brake
- 0 without holding brake · 2 DC 24 V holding brake, electrically released
- Connection / communication
- H hybrid connector · SE SERCOS 2 (RS422)
- Voltage / firmware
- D7 DC 750 V connecting voltage · FW separate firmware subposition
- Safety / other design
- NN without safety technology at X41 · NN no other design
Configuration checklist
Identification guide
Match the whole KSM041 configuration
- IndraDrive Mi systems
- KSM01.2B distributed servo-drive configurations
- SERCOS 2 (RS422) networks
- DC 750 V hybrid-connected axes
Series questions
KSM041 questions
Before Litco pulls a unit
Is KSM041 enough information to order a replacement?+
No. KSM041 identifies the series group, but the complete type code still carries the winding, cooling, feedback, mounting, shaft, brake and mechanical options that determine compatibility.
Which KSM041 fields should I compare first?+
Start with complete ksm01.2b designation and motor size; size-specific winding code; s1 single-turn or m1 multi-turn absolute encoder. Then preserve the remaining suffix, material number, revision and every installed option or firmware label.
Where is KSM041 equipment commonly used?+
KSM041 is documented for indradrive mi systems, ksm01.2b distributed servo-drive configurations, sercos 2 (rs422) networks, dc 750 v hybrid-connected axes. The installed machine, axis and connected equipment still control the final replacement decision.
Can Litco evaluate a failed KSM041 unit?+
Yes. Litco can discuss replacement, repair and exchange paths after reviewing the complete code, application and failure information.
Get a replacement or repair quote.
Call to check stock, condition and lead time. Your part number carries into the form.