BrandIndramatBosch Rexroth · Indramat

Product identificationMDD112C-N-030-N2M-130PA2

Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.

MDD112C · complete type code

MDD112C-N-030-N2M-130PA2

Indramat digital AC servo motor

A complete MDD112C configuration for a digital-drive servo axis. This page separates the housing, speed, feedback, centering, shaft, connector and brake fields that must match the installed machine.

Call to check stock, condition and price

Call 210-680-9570 Quick Quote

Product description

What MDD112C-N-030-N2M-130PA2 identifies

MDD112C-N-030-N2M-130PA2 is an Indramat MDD112C digital AC servo motor with a 3,000 rpm nominal winding. The complete suffix identifies its housing, feedback, centering, shaft, connector and brake configuration.

Planning values below apply to MDD112C-N-030. Confirm the motor-drive combination before replacement.

Full type-code breakdown

Exact type-code decoder

Read this configuration field by field

Motor platform

MDD motor for digital drive controllers

Motor frame / length

112 frame · C length

Housing design

Standard housing suitable for natural convection or an applicable surface-cooling arrangement

Nominal-speed code

030 · 3,000 rpm

Balance class

N · standard manufacturer balance-class code

Side-B shaft end

2 · standard design without side-B shaft extension

Motor feedback

Digital servo feedback with integrated multiturn absolute encoder

Centering diameter

130 mm standard centering

Output shaft

32 mm (k6) keyed output shaft; verify the mating key and hub dimensions

Power connection

Power connector to side A

Blocking brake

40 Nm blocking brake

Compare a related configuration

Configuration difference

Compare a close MDD112C exact code

The closest published same-model record is MDD112C-N-030-N2M-130PB2. The differences below preserve the exact feedback, speed and mechanical interfaces instead of grouping unlike replacements together.

A close code is not automatically interchangeable. Confirm the controller, mating shaft and flange, connector direction, holding requirement and complete machine load.

Compared configurationMDD112C-N-030-N2M-130PB2Connection: Power connector to side A instead of Power connector to side BOpen comparison page →

Compatibility checklist

Before replacing MDD112C-N-030-N2M-130PA2, match the complete nameplate and machine configuration.

Complete motor code: Verify the frame, motor length, winding or speed, cooling, feedback, shaft, brake and every factory suffix.
Mechanical interface: Compare the flange, centering diameter, shaft diameter and style, keyway, seal, mounting position and available machine clearance.
Electrical match: Record the feedback device, power and feedback connections, holding-brake voltage and the exact connected drive or controller.
Machine duty: Include the machine, axis, operating cycle, cooling arrangement and failure symptoms so a technician can evaluate the complete application.

For repair, send the fault or symptoms. Helpful photos show the tag, complete unit, mounting and connections.

Get a replacement or repair quote.

Call to check stock, condition and lead time. Your part number carries into the form.

Quick Quote Call 210-680-9570 Add photos or repair details →

More MDD112C configurations

Related exact type codes

Call to check stockMDD112D-N-030-N2M-130PB0 Call to check stockMDD112C-N-030-N2M-130PB2 Call to check stockMDD112C-N-030-N2M-130GA2 Call to check stockMDD112C-N-030-N2M-130PA0 Call to check stockMDD112C-N-030-N2M-130PB0 Call to check stockMDD112C-N-030-N2M-130PB1

← Return to the MDD112C model page

Technical sourceBosch Rexroth Indramat MDD project-planning manual · Fig. 10.1, page 96

MDD 112 technical and dimensional data, manual pages 96–108. Manual data distinguishes model references from exact winding values and usable motor-drive combinations. Match the full type code, connectors, drive and machine load.

Open Original Manual ↗Open MDD112 Type Code ↗