BrandIndramatBosch Rexroth · Indramat

Product identificationMAC112C-0-HD-2-C/180-B-0/S003

Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.

MAC112C · complete type code

MAC112C-0-HD-2-C/180-B-0/S003

Indramat analog AC servo motor

A complete MAC112 configuration for a legacy analog-drive servo axis. This page decodes the cooling, winding, feedback, centering, connector, brake and encoder fields that must match the installed machine.

Call to check stock, condition and price

Call 210-680-9570 Quick Quote

Product description

What MAC112C-0-HD-2-C/180-B-0/S003 identifies

MAC112C-0-HD-2-C/180-B-0/S003 is an Indramat MAC112C analog AC servo motor with winding HD for 2,000 rpm. Match the complete cooling, feedback, centering, connection and brake fields.

The table uses 60 K housing-temperature-rise planning values. The selected drive, load, cooling and any factory special drawing determine the usable installation.

Full type-code breakdown

Exact type-code decoder

Read this MAC112 configuration field by field

Motor platform

MAC motor for analog drives

Motor frame / length

112 frame · C length

Cooling

Natural-convection cooling

Winding

HD · H winding · standard-application winding design

Nominal winding speed

2,000 rpm

Motor feedback

Tachofeedback

Tacho voltage

3 V per 1,000 rpm nominal-speed setting

Tacho type

Standard tacho type

Centering diameter

180 mm special centering

Power connection

Power connector to side B

Blocking brake

Without blocking brake

Mounted encoder

No mounted-encoder code

Special design

S003

Compare a related configuration

Configuration difference

Compare a close MAC112C exact code

The closest published same-model record is MAC112C-0-HD-2-C/130-B-0. The differences below help prevent a winding, feedback, brake, connector or factory-option mismatch.

Encoder and special-design strings are preserved exactly as recorded. The physical nameplate and applicable factory drawing remain authoritative for their detailed meaning.

Compared configurationMAC112C-0-HD-2-C/130-B-0Centering: 180 mm instead of 130 mm · Special design: S003 instead of None codedOpen comparison page →

Compatibility checklist

Before replacing MAC112C-0-HD-2-C/180-B-0/S003, match the complete nameplate and machine configuration.

Complete motor code: Verify the frame, motor length, winding or speed, cooling, feedback, shaft, brake and every factory suffix.
Mechanical interface: Compare the flange, centering diameter, shaft diameter and style, keyway, seal, mounting position and available machine clearance.
Electrical match: Record the feedback device, power and feedback connections, holding-brake voltage and the exact connected drive or controller.
Machine duty: Include the machine, axis, operating cycle, cooling arrangement and failure symptoms so a technician can evaluate the complete application.

For repair, send the fault or symptoms. Helpful photos show the tag, complete unit, mounting and connections.

Get a replacement or repair quote.

Call to check stock, condition and lead time. Your part number carries into the form.

Quick Quote Call 210-680-9570 Add photos or repair details →

More MAC112 configurations

Related exact type codes

Call to check stockMAC112D-2-FD-4-C/130-A-0/WI520LV/S005 Call to check stockMAC112C-0-HD-2-C/130-B-0 Call to check stockMAC112C-0-HD-2-C/130-A-0 Call to check stockMAC112C-0-HD-3-C/180-A-2/S019 Call to check stockMAC112C-0-ED-3-C/130-A-0/S005 Call to check stockMAC112C-0-KD-3-C/130-A-0/S005

← Return to the MAC112C model page

Technical sourceIndramat MAC manual · tacho §2.4.1 p.25; encoder Fig. 2.24 p.28; performance/brake Figs. 7.1/7.3 pp.118–119; options Figs. 7.21–7.22 pp.135–136

The manual separates feedback, winding performance, brake data and the available-options key. Confirm the controller, full tag, mechanical interfaces and any S-number drawing before substitution.

Open Planning Manual Copy ↗Open MAC112 Type Code ↗