Industrial motion control since 1988 · Search part numbers210-680-9570 · Se Habla Español · Shop Litco on eBay ↗
Menu
BrandIndramatBosch Rexroth · Indramat
Product identificationMAC112A-0-ZD-4-C/130-B-0/WI524LV/S005

Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.

MAC112A · complete type code

MAC112A-0-ZD-4-C/130-B-0/WI524LV/S005

Indramat analog AC servo motor

A complete MAC112 configuration for a legacy analog-drive servo axis. This page decodes the cooling, winding, feedback, centering, connector, brake and encoder fields that must match the installed machine.

Call to check stock, condition and price
Call 210-680-9570Quick Quote

Product description

What MAC112A-0-ZD-4-C/130-B-0/WI524LV/S005 identifies

MAC112A-0-ZD-4-C/130-B-0/WI524LV/S005 is an Indramat MAC112A analog AC servo motor with winding ZD for 1,500 rpm. Match the complete cooling, feedback, centering, connection and brake fields.

The table uses 60 K housing-temperature-rise planning values. The selected drive, load, cooling and any factory special drawing determine the usable installation.

Full type-code breakdown

Exact type-code decoder

Read this MAC112 configuration field by field

01

Motor platform

MAC motor for analog drives

02

Motor frame / length

112 frame · A length

03

Cooling

Natural-convection cooling

04

Winding

ZD · Z winding · standard-application winding design

05

Nominal winding speed

1,500 rpm

06

Motor feedback

Tachofeedback with a mounted incremental or absolute encoder

07

Tacho voltage

3 V per 1,000 rpm nominal-speed setting

08

Tacho type

Standard tacho type

09

Centering diameter

130 mm standard centering

10

Power connection

Power connector to side B

11

Blocking brake

Without blocking brake

12

Mounted encoder

WI524LV incremental encoder · standard mounting · 625 lines · 5 V square-wave signal

13

Special design

S005

Compare a related configuration

Configuration difference

Compare a close MAC112A exact code

The closest published same-model record is MAC112A-0-VD-4-C/130-B-1/WI520LV/S005. The differences below help prevent a winding, feedback, brake, connector or factory-option mismatch.

Encoder and special-design strings are preserved exactly as recorded. The physical nameplate and applicable factory drawing remain authoritative for their detailed meaning.

Compared configurationMAC112A-0-VD-4-C/130-B-1/WI520LV/S005Winding: ZD instead of VD · Brake: Without blocking brake instead of Standard 14 Nm blocking brake · Encoder: WI524LV instead of WI520LVOpen comparison page →
Compatibility checklist

Before replacing MAC112A-0-ZD-4-C/130-B-0/WI524LV/S005, match the complete nameplate and machine configuration.

  • Complete motor code: Verify the frame, motor length, winding or speed, cooling, feedback, shaft, brake and every factory suffix.
  • Mechanical interface: Compare the flange, centering diameter, shaft diameter and style, keyway, seal, mounting position and available machine clearance.
  • Electrical match: Record the feedback device, power and feedback connections, holding-brake voltage and the exact connected drive or controller.
  • Machine duty: Include the machine, axis, operating cycle, cooling arrangement and failure symptoms so a technician can evaluate the complete application.

For repair, send the fault or symptoms. Helpful photos show the tag, complete unit, mounting and connections.

Get a replacement or repair quote.

Call to check stock, condition and lead time. Your part number carries into the form.

Quick QuoteCall 210-680-9570Add photos or repair details →

More MAC112 configurations

Related exact type codes

Call to check stockMAC112B-0-GD-3-F/130-B-1Call to check stockMAC112A-0-VD-4-C/130-B-1/WI520LV/S005Call to check stockMAC112A-0-VD-4-C/130-A-0/WI511LV/S005Call to check stockMAC112A-0-VD-4-C/130-A-1/WI524LV/S005Call to check stockMAC112A-0-LD-3-C/130-A-0/S005Call to check stockMAC112A-0-VD-4-C/130-A-1/WI511LV/S005
← Return to the MAC112A model page
Technical sourceIndramat MAC manual · tacho §2.4.1 p.25; encoder Fig. 2.24 p.28; performance/brake Figs. 7.1/7.3 pp.118–119; options Figs. 7.21–7.22 pp.135–136

The manual separates feedback, winding performance, brake data and the available-options key. Confirm the controller, full tag, mechanical interfaces and any S-number drawing before substitution.

Open Planning Manual Copy ↗Open MAC112 Type Code ↗