Industrial motion control since 1988 · Search part numbers210-680-9570 · Se Habla Español · Shop Litco on eBay ↗
Menu
BrandIndramatBosch Rexroth · Indramat
Product identificationMAC090C-0-KD-1-B/110-B-1/J1250

Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.

MAC090C · complete type code

MAC090C-0-KD-1-B/110-B-1/J1250

Indramat AC servo motor

A complete MAC090C configuration for an analog-drive servo axis. This page separates the winding, feedback, centering, connector and brake fields that must match the machine.

Call to check stock, condition and price
Call 210-680-9570Quick Quote

Product description

What MAC090C-0-KD-1-B/110-B-1/J1250 identifies

MAC090C-0-KD-1-B/110-B-1/J1250 is an Indramat MAC090C AC servo motor with winding KD and a nominal 2,000 rpm rating. Match its complete cooling, feedback, centering, connection and brake fields.

The ratings below are manufacturer planning values. Confirm the installed drive, cooling and any special drawing before replacement.

Full type-code breakdown

Exact type-code decoder

Read this configuration field by field

01

Motor platform

MAC motor for analog drives

02

Motor frame / length

090 frame · C length

03

Cooling

Natural convection

04

Winding

KD · K winding group

05

Nominal winding speed

2,000 rpm

06

Motor feedback

Incremental-encoder feedback

07

Tacho / type field

Standard field B for incremental-encoder feedback; confirm the exact encoder data

08

Centering diameter

110 mm

09

Power connection

Power connector to side B

10

Blocking brake

Standard 6.5 Nm blocking brake

11

Special / encoder suffix

J1250 mounted encoder record; the physical nameplate and applicable special drawing govern

Compare a related configuration

Configuration difference

How this exact code differs from a close MAC090C match

The closest published comparison in this catalog is MAC090C-0-KD-2-C/110-A-1/S01. These pages share 4 of the eight decoded configuration fields used for comparison. The fields below preserve the exact distinction instead of treating suffix-only or interface changes as interchangeable inventory.

Factory and encoder suffixes are carried exactly as recorded. Their detailed meaning must be confirmed from the physical nameplate and applicable factory drawing before a replacement is approved.

Compared configurationMAC090C-0-KD-2-C/110-A-1/S01Feedback: Incremental-encoder feedback instead of Tachofeedback · Tacho field: Standard field B for incremental-encoder feedback; confirm the exact encoder data instead of Standard tacho type · Power connection: Power connector to side B instead of Power connector to side A · Special suffix: J1250 instead of S01Open comparison page →
Compatibility checklist

Before replacing MAC090C-0-KD-1-B/110-B-1/J1250, match the complete nameplate and machine configuration.

  • Complete motor code: Verify the frame, motor length, winding or speed, cooling, feedback, shaft, brake and every factory suffix.
  • Mechanical interface: Compare the flange, centering diameter, shaft diameter and style, keyway, seal, mounting position and available machine clearance.
  • Electrical match: Record the feedback device, power and feedback connections, holding-brake voltage and the exact connected drive or controller.
  • Machine duty: Include the machine, axis, operating cycle, cooling arrangement and failure symptoms so a technician can evaluate the complete application.

For repair, send the fault or symptoms. Helpful photos show the tag, complete unit, mounting and connections.

Get a replacement or repair quote.

Call to check stock, condition and lead time. Your part number carries into the form.

Quick QuoteCall 210-680-9570Add photos or repair details →

More MAC090C configurations

Related exact type codes

Call to check stockMAC090C-0-KD-2-C/110-A-1/S01Call to check stockMAC090C-0-KD-1-B/110-A-1/J625/S01Call to check stockMAC090C-0-KD-1-B/110-A-1/J1250/S05Call to check stockMAC090C-0-GD-1-B/110-A-1/I00625/S001Call to check stockMAC090C-0-GD-1-B/110-A-1/J625Call to check stockMAC090C-0-GD-1-B/110-A-1/J625/S01
← Return to the MAC090C model page
Technical sourcesIndramat MAC project-planning manual · figures 5.1, 5.2 and 5.19 · preserved MAC090 type-code key

Manual data distinguishes planning values from usable motor-drive combinations. The type-code key identifies configuration fields; special and encoder suffixes still require the complete nameplate and applicable drawing.

Open Planning Manual Copy ↗Open MAC090 Type Code ↗