Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.
A complete MAC090C configuration for an analog-drive servo axis. This page separates the winding, feedback, centering, connector and brake fields that must match the machine.
Product description
MAC090C-0-GD-4-C/110-A-0/W1520L/S005 is an Indramat MAC090C AC servo motor with winding GD and a nominal 3,000 rpm rating. Match its complete cooling, feedback, centering, connection and brake fields.
The ratings below are manufacturer planning values. Confirm the installed drive, cooling and any special drawing before replacement.
Exact type-code decoder
MAC motor for analog drives
090 frame · C length
Natural convection
GD · G winding group
3,000 rpm
Tachofeedback with a mounted incremental or absolute encoder
Standard tacho type
110 mm
Power connector to side A
Without blocking brake
W1520L mounted encoder or feedback-option record with S005 factory special-option record; the physical nameplate and applicable special drawing govern
Configuration difference
The closest published comparison in this catalog is MAC090C-0-GD-4-C/110-A-0/W1520LX/S001. These pages share 7 of the eight decoded configuration fields used for comparison. The fields below preserve the exact distinction instead of treating suffix-only or interface changes as interchangeable inventory.
Factory and encoder suffixes are carried exactly as recorded. Their detailed meaning must be confirmed from the physical nameplate and applicable factory drawing before a replacement is approved.
Before replacing MAC090C-0-GD-4-C/110-A-0/W1520L/S005, match the complete nameplate and machine configuration.
For repair, send the fault or symptoms. Helpful photos show the tag, complete unit, mounting and connections.
Call to check stock, condition and lead time. Your part number carries into the form.
More MAC090C configurations
Manual data distinguishes planning values from usable motor-drive combinations. The type-code key identifies configuration fields; special and encoder suffixes still require the complete nameplate and applicable drawing.