Match the complete nameplate, including every suffix. Ask Litco for current photos of the unit being quoted.
A complete MAC090A configuration for an analog-drive servo axis. This page separates the winding, feedback, centering, connector and brake fields that must match the machine.
Product description
MAC090A-0-RD-1-B/110-A-0/I00625/S001 is an Indramat MAC090A AC servo motor with winding RD and a nominal 3,000 rpm rating. Match its complete cooling, feedback, centering, connection and brake fields.
The ratings below are manufacturer planning values. Confirm the installed drive, cooling and any special drawing before replacement.
Exact type-code decoder
MAC motor for analog drives
090 frame · A length
Natural convection
RD · R winding group
3,000 rpm
Incremental-encoder feedback
Standard field B for incremental-encoder feedback; confirm the exact encoder data
110 mm
Power connector to side A
Without blocking brake
I00625 mounted encoder record with S001 factory special-option record; the physical nameplate and applicable special drawing govern
Configuration difference
The closest published comparison in this catalog is MAC090A-0-RD-2-C/110-A-0/S001. These pages share 5 of the eight decoded configuration fields used for comparison. The fields below preserve the exact distinction instead of treating suffix-only or interface changes as interchangeable inventory.
Factory and encoder suffixes are carried exactly as recorded. Their detailed meaning must be confirmed from the physical nameplate and applicable factory drawing before a replacement is approved.
Before replacing MAC090A-0-RD-1-B/110-A-0/I00625/S001, match the complete nameplate and machine configuration.
For repair, send the fault or symptoms. Helpful photos show the tag, complete unit, mounting and connections.
Call to check stock, condition and lead time. Your part number carries into the form.
More MAC090A configurations
Manual data distinguishes planning values from usable motor-drive combinations. The type-code key identifies configuration fields; special and encoder suffixes still require the complete nameplate and applicable drawing.