- Complete DDC 1.2 designation
- Liquid or air-cooling code
- 50 A, 100 A or 200 A rated-current field
- Digital-servo or resolver motor feedback
- Command module, function code and separate firmware item
DDC family · DDC1.2 series
Indramat DDC 1.2 digital servo drives
DDC 1.2 drives are documented in liquid- or air-cooled 50 A, 100 A and 200 A configurations with selectable feedback and command options plus separately ordered firmware.
Product identificationDDC1.2
Request photos of the exact unit with your quote.
Need a complete DDC1.2 configuration?
Call to check stock with the full nameplate code. We have not matched a complete Finale description to this model yet.
Models
Known DDC1.2 catalog pages
Don’t see your configuration?
Send the complete nameplate code so Litco can check availability, condition and compatibility.
Call 210-680-9570Series overview
What DDC1.2 identifies
The preserved DDC 1.2 order-code reference separates cooling type, rated current, noise emission at motor, feedback and command-module choices. Digital-servo or resolver feedback and ANALOG, INTERBUS-S, single-axis positioning or SERCOS command interfaces are documented; the FW suffix identifies firmware as a separate order item.
Ratings, connections, feedback, braking and mechanical options vary by complete type code. Send Litco Automation a clear nameplate photo so the exact configuration and compatible replacement can be confirmed.
Technical specifications
Documented DDC1.2 order-code fields
These values come from the preserved type-code reference. They describe documented ordering fields, not a promise that every theoretical combination was produced or is currently in stock.
- Series / version
- 1.2
- Cooling codes
- F liquid · K air, natural convection
- Rated-current codes
- 050 = 50 A · 100 = 100 A · 200 = 200 A
- Noise emission at motor
- A standard for 100 A and 200 A · C reduced-noise standard for 50 A
- Motor feedback
- D digital servo feedback · R resolver feedback
- Command modules
- A ANALOG · C INTERBUS-S · L single-axis positioning · S SERCOS
- Function fields
- The options table lists function code 01 and function-code version 01
- Firmware
- FW · ordered as a separate item
- Source note
- The printed example uses N and 07 even though this page lists F/K cooling and function code 01; no meaning is assigned here to N or 07
Configuration checklist
Identification guide
Match the whole DDC1.2 configuration
- DDC 1.2 systems with an ANALOG interface
- DDC 1.2 systems with an INTERBUS-S interface
- DDC 1.2 systems with a SERCOS interface
- DDC 1.2 single-axis positioning configurations
Series questions
DDC1.2 questions
Before Litco pulls a unit
Is DDC1.2 enough information to order a replacement?+
No. DDC1.2 identifies the series group, but the complete type code still carries the current, command, communication, feedback, firmware and installed-module options that determine compatibility.
Which DDC1.2 fields should I compare first?+
Start with complete ddc 1.2 designation; liquid or air-cooling code; 50 a, 100 a or 200 a rated-current field. Then preserve the remaining suffix, material number, revision and every installed option or firmware label.
Where is DDC1.2 equipment commonly used?+
DDC1.2 is documented for ddc 1.2 systems with an analog interface, ddc 1.2 systems with an interbus-s interface, ddc 1.2 systems with a sercos interface, ddc 1.2 single-axis positioning configurations. The installed machine, axis and connected equipment still control the final replacement decision.
Can Litco evaluate a failed DDC1.2 unit?+
Yes. Litco can discuss replacement, repair and exchange paths after reviewing the complete code, application and failure information.
Get a replacement or repair quote.
Your part number carries into the form. Tell us what you need and how soon you need it.