ECODRIVE03 FGP03VRS fault codes & diagnostics

ZKL1-Error at command start

Command Get mark position

Incremental encoder required

Cancel reference point procedure command

Parking axis command

Parking axis only while drive is disabled

Command measuring wheel mode

Measuring wheel operation not possible

Command automatic loop tuning

Start requires drive enable

Motor feedback data not valid

Inertia detection failed

Gain adjustment failed

Travel range invalid, P-0-0166 & P-0-0167

Travel range exceeded

Communication phase 2

Communication phase 3

Drive HALT

Control and power sections ready for operation

Ready for power on

Drive in TORQUE control

Drive in VELOCITY control

Position mode with encoder 1

Position mode with encoder 2

Position mode lagless, encoder 1

Position control lagless, feedback 2

Drive controlled interpolation, encoder 1

Drive controlled interpolation, encoder 2

Drive controlled interpolation, lagless, encoder 1

Drive controlled interpolation, lagless, encoder 2

Velocity synchronization, virtual master drive

Velocity synchronization, real master drive

Phase s ynchronization, encoder 1, virtual master drive

Phase s ynchronization, encoder 2, virtual master drive

Phase s ynchronization, encoder 1, real master drive

Phase s ynchr. lagless, encoder 1, virtual master drive

Phase s ynchr. lagless, encoder 2, virtual master drive

Phase s ynchr. lagless, encoder 1, real master drive

Cam shaft, encoder 1, virtual master drive

Cam shaft, encoder 2, virtual master drive

Cam shaft, encoder 1, real master drive

Cam shaft, lagless, encoder 1, virt. master drive

Cam shaft, lagless, encoder 2, virt. master drive

Cam shaft, lagless, encoder 1, real master drive

Drive controlled positioning, encoder 1

Drive controlled positioning, encoder 1, lagless

Drive controlled positioning, encoder 2

Drive controlled positioning, encoder 2, lagless

Process block mode, encoder 1

Process block mode lagless, encoder 1

JOG mode positive

Process block mode, encoder 2

Process block mode lagless, encoder 2

JOG mode negative

Automatic drive check and adjustment

Drive deceleration to standstill

Unknown operation mode

Diagnostic Message Display: -0

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: -1

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: -2

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: -3

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: -4

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: -5

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: -6

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: (2 dots)

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: E1

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: E2

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: E3

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: E4

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Diagnostic Message Display: E5

Listed in the source section for basic initialization and fatal system errors. The supplied index does not give an expanded explanation.

Operation Status: bb

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: Ab

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: AC

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: AE

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: AF

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: AH

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: Jb

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: JF

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: P2

The supplied index lists this display under Operation Status without an expanded description.

Operation Status: P3

The supplied index lists this display under Operation Status without an expanded description.