Mains and transformer
Input voltage, transformer, frequency and line components must agree with the installed supply design.
Mains input, DC bus and connected load
Industrial drive power-supply repair support
A drive-system supply operates as part of a cabinet. Litco reviews the complete supply code together with line components, connected drives, braking hardware and the event that brought the DC bus down.
Configuration-aware intake
Evaluate the supply as part of the power system
Legacy modular drive systems can use one supply to feed several axes through a shared DC link. Supply rating, mains voltage, transformer arrangement, regenerative or bleeder hardware, line chokes and the combined drive load all affect whether a replacement belongs in that cabinet.
Before removing the module, photograph the cabinet layout, supply label, upstream line equipment, DC-bus connections and every alarm or indicator. Do not assume that a damaged-looking supply is the only failed component; the evaluation starts with the whole event and the connected system.
Equipment represented in this catalog
- TVD and TVM power-supply modules
- HVE and HVR DIAX 04 supplies
- KDV and KVR legacy supplies
- IndraDrive HMV and related power components
What changes the recommendation
Four equipment-specific decision factors
DC-bus role
Connected drive count, current demand and shared-bus arrangement show how the supply is used in the machine.
Braking or regeneration
Bleeder, brake resistor and regenerative hardware affect energy handling during deceleration.
Failure event
Trips, blown protection, smoke, heat, contamination and faults on neighboring axes help define the inspection.
Before removal or shipment
Preserve the evidence a bench cannot recreate
Make the equipment electrically safe
Follow the machine builder’s lockout and discharge procedures; hazardous stored energy can remain after power is removed.
Photograph the complete cabinet
Show the supply, connected drives, line components, transformer and all DC-bus or braking hardware.
Capture every type plate
Record the supply, transformer, choke and connected drive codes rather than sending only the failed module number.
Preserve the fault sequence
Note what the machine was doing, which protections opened and which indicators or messages appeared first.
Only qualified personnel should remove or work around industrial electrical and motion-control equipment. Follow the machine builder’s safety, lockout and stored-energy procedures.
Connected catalog paths
Start with the family printed on the tag
TVD power suppliesReview legacy TVD family and series information.Browse TVD power supplies →HVE suppliesBrowse DIAX 04 supply identification and exact catalog records.Browse HVE supplies →HVR regenerative suppliesReview regenerative supply family details and inventory evidence.Browse HVR regenerative supplies →All power suppliesOpen every Indramat power family represented in the catalog.Browse All power supplies →
What the first review can establish
Repair, replacement or the next piece of evidence
Bench evaluation
Litco reviews the submitted unit and cabinet evidence before defining a repair recommendation.
Correct power match
A replacement is compared by full code, input arrangement, DC-bus role and connected system context.
Related-component check
The intake can identify line, braking or neighboring drive information that should be checked before restart.
Have the tag and photos ready?
Ask Litco to evaluate the exact unit.
Call 210-680-9570 or email sales@litcoautomation.com. Scope, timing, price and availability are confirmed before authorization.